wingate_52
Active member
I was wondering if my tied on nocking points were too close and affecting the nock at full draw and release. Using Easton G-nocks, there is 0.4mm clearance/gap with the string in tension on the bow, and the arrow nocked but not drawn back. When the arrow is at full draw, the nocking points may be forced into contact with the nock, exerting twisting forces on the nock and arrow on release. Beiter nocks have some string clearance on the top side of their nocks, but only a 0.3mm clearance between No.1 nocks and their served in plastic nocking points. What gaps do you archers have twixt nock and nocking point. Some are tight, and shoot well, some are loose and...