Show us your Recurve Setup

Allen Gael

New member
Let me kick it off

The 2012 bow



SF Forged+ Riser
Kaya Tomcat 68" 42# limbs
Avalon Tec One sight
Decut Crown stabilizer system
Infitec top damper
SF Forged berger button
SF Forged arrow rest
SF Axiom sight pin
Decut clicker
Angel majesty 16 strand string


The 2014 bow



W&W inno max 25" riser
W&W inno ex power 68" 42# limbs
Shibuya ultima rc sight
Easton X10 stabilizer system
Sf ultimate top damper
Flex flexball2.0 dampers
Spigarelli securbutton II berger button
Spigarelli z/t arrow rest
Spigarelli berti light sight pin
Beiter 0.25 clicker
Angel majesty 16 strand string
 


briantodd

New member
image.jpgimage.jpg that 2014 bow for 35lb class, 39 inches long 16 inch draw past brace height of 3 inches..... 5.3 gram arrow 15.5 inches long!
:shocked::shocked::shocked::shocked::shocked::shocked:
 


briantodd

New member
All made by me,I'm dead proud of them,there are several others too! it has taken 2 years to get a set of working limbs but now that's sorted and the ones you are looking at are 35 lb draw weight,I have some 50 lb on a different riser ,also home made and some lighter limbs too but can make any weight now so I'm not fussed,just make them when I need them,all international fitting too! It's been a 3 year project and I'm starting to learn now.......
 


briantodd

New member
Flight hoe yes?

Hi Tuck it is indeed a flight bow, there are 5 altogether in my range,each a development ahead of the last hopefully soon I will settle on a design for production, limbs too from 16 inches long! But I have to test this set up first hopefully it's fast...
 


briantodd

New member
Flight bow yes?

Hi Tuck it is indeed a flight bow, there are 5 altogether in my range,each a development ahead of the last hopefully soon I will settle on a design for production, limbs too from 16 inches long! But I have to test this set up first hopefully it's fast...
 


Robaloba

New member
Started with this setup two years ago, although originally with SF Elite Fiber Foam Limbs that I could not get aligned very well.
photo 1.jpgphoto 2.jpg

Hoyt Horizon Riser (Ortho Grip and Floating Tiller Bolts added)
KG Universal Carbon Limbs
Cartel Balkan Stabilsers
Decut Sight (loads of weight added to opposite side rod to balance)
Shibuya DX Button
Stick on SF rest.
Beiter Clicker
8125 String, Brace Height 8.5", Tiller Built into Limbs of 3-4mm.
 


Robaloba

New member
Then changed a few bits.

photo 3.jpg

Hoyt Helix Riser (Ortho Grip)
KG Universal Carbon Limbs
Beiter Side Rods, Cartel Balkan Long Rod. Beiter V Bar, SF 4" Extender.
Decut Sight (loads of weight added to opposite side rod to balance)
Shibuya DX Button
Shibuya Ultima Rest.
Beiter Clicker
8125 String, Brace Height 8.75", Tiller 3-4mm.
 


Robaloba

New member
About two years later and now it looks like this, I've had to change things gradually because money has always been tight.
Although the Risers have got older the feeling of the shot is better.

photo 4.jpgphoto 5.jpgphoto 6.jpgphoto 7.jpg

Hoyt Matrix Riser (Jager Best 2.0 Grip)
Uukha Ex1 38lb Limbs (Medium 68")
Beiter Stabilsers (just need some more white covers for long rod)
Shibya Ultima Carbon Sight
Shibuya DX Button
Shibuya Ultima Rest.
Beiter Clicker
Astroflight 14 strand 63.5" String, Brace Height 9.5", Tiller 5mm.
 


DarkMuppet

Member
Here's my current bow ..







Petron Pro Extreme Riser
Winex Limbs
Spigarelli Sight
Fivic CEX5 Long Rod
ACE Twins
Flex Top Dampener

:D
 


Basilios

New member
ImageUploadedByTapatalk1400802331.394549.jpg
ImageUploadedByTapatalk1400802361.138976.jpg

Hoyt GMX LH riser
Hoyt F7 34# limbs
Sureloc quest x sight
Shibuya rest
Beiter plunger and clicker
Easton x10 long rod.

Need to talk this bow out soon for some sunshine.
 


RichParker

New member
My recurve set up:

Fiberbow 5.99 riser with Jaeger grip.
Mybo clicker
Beiter button
Shibuya rest
Axcel acheive sight with Titan pin
KG Nexgen limbs
8125G string with Beiter nock point
Arctec Pro XXL rods
Fiberbow V-bar connecter
Doinker suppression mount
Cartel counterweight
 


New2Archery

Supporter
Supporter
My Recurve Bow

Bow1.jpgBow2.jpgBow3.jpgbow4.jpg

Hoyt GMX Riser, 25"
Hoyt Quattro 46# short limbs
Beiter button, V-Bar
Shibuya rest & carbon site
Easton X10 stablisers (28" LR, 12" sides)
Goatboy 4" extender
Homemade 8125G string with Halo servings
 


jantar77

New member
This is my old bow I used to last summer
Oldbow.jpg

SF Premium riser 25"
Kap Winstorm Carbon short limbs
Cartel 2000 sight
Shibuya button
W&W arrow rest

..and here after some custom painting applied and CXT inspired under-grip variable weight system. :)
Oldbow2.jpg

This is what I switched to
Newbow1.jpg
Newbow2.jpg

W&W Inno Max 25"
Inno Ex-Prime Medium limbs
SF Ultimate Pro sight with Shibuya ring pin (and high-grade steel blackened pin screw)
Beiter button, Shibuya arrow rest
Custom built wooden grip
Some mixed-brands stabilisers setup Cartel/SF/Joomong/EXE/Kaya which I tend to replace once I deserve it with my results :)
 


Hawkmoon

Member
IMG_20140702_100733.jpg

Pretty boring and basic from me I am afraid not even a long rod or clicker.
 


Top