Show us your Recurve Setup

Hawkmoon

Member
I see you have the EX1's, whats your brace height?, looking like yours is quite high too.
How are you finding the limbs?
For me with this setup I find that the sweet spot is just about 9.5 inches and I love the limbs, they feel very fast as a lot of people say but I think is is mostly feel.
 


RichParker

New member
Well a bit of a change to my set up, I finished putting the pieces together hopefully do the final tune tonight.



Uukha Uprolite riser with VX1000 limbs (40#)
Shibuya rest and button
Axcel Achieve RX sight
16 strand 8125G String with Beiter nock point
Win & Win carbion clicker
Merlin wrist sling
Arctec Pro XXL rods
Fiberbow V-bar connecter
Doinker suppression mount
 


chrislourens

New member
Hi Guys

This is my setup, it seems like I might be an SF fanboy :poulies::

SF Elite + Riser LH 25"
SF Elite Carbon Foam limbs 38# (Medium)
SF Elite arrow rest
SF Elite + stabilizers (28" Long rod, 10" Side rods, 4" Extender)
Shibuya DX button
Avalon TEC One sight
Cartel Magnetic Clicker

Arrows: Carbon Impact Ultra Fast 620


View attachment 4361


View attachment 4360
 


Aleatorian

Member
Here's my setup:
Inno Max 25"
Inno EX Prime 36# Long
BCY Trophy 18st string
HMC 22 stabs 30" long rod 12" sides 5" extender
CX2 V bar
W&W Carbon clicker
Cartel 3" Damper (used as top rod)
Shibuya Ultima Carbon RC sight (with Beiter sight tunnel)
Shibuya Ultima rest
Shibuya DX button
IMG_0231.jpg
 


RogueFletching

New member
Well a bit of a change to my set up, I finished putting the pieces together hopefully do the final tune tonight.



Uukha Uprolite riser with VX1000 limbs (40#)
Shibuya rest and button
Axcel Achieve RX sight
16 strand 8125G String with Beiter nock point
Win & Win carbion clicker
Merlin wrist sling
Arctec Pro XXL rods
Fiberbow V-bar connecter
Doinker suppression mount
V1000s :eye-poppi Nice!
 


OskarsL

New member


SF Forged+ with Shibuya DX button and Spigarelli EvoII rest
Uukha EX1 38lbs long limbs with 16 strand Astro string
Fivics CEX7 stabilisers (30" long rod, 11" short rods and 5" extender + Beiter flat 90? vbar)
Avalon TecOne sight with Spigarelli pin.
 


chuffalump

Member


Last part of the stabs just arrived.

Win & Win Winact VT riser with built up grip.
SF Premium Plus limbs.
Shibuya DX button.
SF Velocity Pro Carbon sight.
Cartel something or other top thingy.
Fivics Max Pro stabilizer set.
8125G red/black string.

Colour scheme - Christmas.
 


Rhysie

New member
Here is mine!

Here is my setup:

Mybo Rio
SF Premium foam/carbon limbs 66" #28
SF Velocity Arrow Rest
Shibuya Button
(unknown string)
SF Axiom Bow Stand

At the moment I'm running Easton Neos arrows, I started with these and hopefully will be upgrading too platinum's very soon!
I will also be adding a Beiter Clicker soon too.

Won't allow me too upload a picture of my setup, sorry!
 


richard345

Member
Here's mine

SF Forged + Riser
SF Elite Fibre Foam limbs
SF Axiom Longrod
SF Velocity Carbon sight
SF Forged button
Easton Platinum Plus 1816 arrows 29"

Christmas is coming, so a few more bits to be added :)
 


Attachments

richard345

Member
The limbs are 28# long so that makes a 70" bow on the 25" riser. I've wound the bolts in 5 complete turns now, so I guess I'll be pulling 30 - 31# now. One of the guys at the club has a set of scales, so I must check again. I think there are a few more turns available when I get a bit more skilled.
 


jantar77

New member


Last part of the stabs just arrived.

Win & Win Winact VT riser with built up grip.
SF Premium Plus limbs.
Shibuya DX button.
SF Velocity Pro Carbon sight.
Cartel something or other top thingy.
Fivics Max Pro stabilizer set.
8125G red/black string.

Colour scheme - Christmas.
:rotfl: that colour scheme made my day.
 


buzz lite beer

New member
10746702_513844732089736_764551285_o.jpg

My W&W AL1 with Uukha UX100's @ 43lb (I'm getting too old for anything heavier ) X10 Stabilisers, Doinker Billy V-bar, Shibuya ultima sight
 


EVC

New member
This is my new setup.






Hoyt GMX, 40lbs medium VX1000, string with 16 strands of 8125.

I did not shoot it much tonight (training form with a lower poudage bow) but I must admit I am very impressed.

They are very smooth and extremely silent, having practically no post shot vibration. What a difference from the INNO EX Power with similar pondage! I would love to have a chronograph to see how fast are them and how they compare with the WinWins in this item.
 


Laurie

New member


C'mon Hawkmoon, how can a Revolution be "boring"?

Revolution/SF carbon-/wood composite limbs/Decut sight, open ring/ Cartel longrod and weight/Shibuya button/Spig clicker and magnetic rest

- -
 


Attachments

Last edited:

The Geezer

New member
Posted this in the wrong thread back in May :ashamed:







Riser: Win&Win Inno Max (25" Matte Black)
Limbs: Inno Ex Power 36lb Long (Matte Black) with 43lbs OTF
Button: Fivics SM740 (outdoor) & Beiter (indoor)
Rest: Shibuya Ultima
Sight: Fivics FV-200 (re-using from old bow)
Stabiliser: X10 (full set)
V-Bar: Shibuya Caruno
Arrows: Easton ACE 470, nock pins, 100gr points and 2" gaspro's (outdoor)
Easton X7 2114, 4" shield feathers (indoor)
 


Top